Shop All Flooring

Blue Forest engineered hardwood brings the timeless character of real white oak and maple to spaces where solid hardwood can’t always go. A genuine hardwood wear layer is bonded to a dimensionally stable engineered core, so these random-length planks handle concrete subfloors, radiant heat, and below-grade rooms when installed to spec — with the authentic look and feel of a traditional wood floor.

Features

• Real hardwood surface: genuine white oak and maple veneers with natural grain and tone.
• Random-length planks: boards from roughly 12 in to 84 in for a natural, non-repeating layout.
• Dimensionally stable: engineered core suits concrete, radiant heat, and below-grade installs per guidelines.
• Versatile install: nail, glue, or float depending on subfloor and method.
• Backed for life: lifetime structural & finish warranty; FloorScore certified, CARB Phase II compliant.

Specifications

Coverage & Ordering

Sold by the box — coverage varies by color (about 24–33 sq ft per box). Confirm the square footage for your selected color and order about 7–10% extra for cuts and waste.

You may also need

• Matching stair nose, reducer, T-molding & threshold — color-matched Blue Forest transitions and stair parts.
• Underlayment & moisture barrier — for floating installs and over concrete subfloors.

Refreshing a kitchen or bath? Pair it with our in-house Rose Hill Cabinets to complete the room.

Blue Forest Milano strand-woven eucalyptus delivers rich, exotic wood tones in one of the hardest and most sustainable natural floors available. Like strand bamboo, eucalyptus fibers are compressed under enormous pressure into a dense, dimensionally stable plank that far outperforms traditional hardwoods on the Janka scale — with a warm, linear grain that reads as a genuine hardwood floor. Tongue-and-groove planks install by nail-down or glue-down over wood or concrete subfloors, on or above grade.

Features

• Exceptionally hard: strand-woven eucalyptus rates well above red oak on the Janka hardness scale — built for high-traffic homes.
• Warm, exotic grain: the Milano tone brings a honeyed, contemporary hardwood look; Milano Toasted adds a deeper, roasted character.
• Sustainably sourced: fast-renewing eucalyptus; FloorScore certified and CARB Phase II compliant.
• Solid, refinishable surface: backed by a lifetime structural & finish warranty.
• Install anywhere wood works: nail-down or glue-down, on or above grade with proper acclimation.

Specifications

Coverage & Ordering

Sold by the box — each box covers 27.31 sq ft. Order about 7–10% extra for cuts and waste. Acclimate 3–4 days before installation; keep interior humidity 35–55%.

You may also need

• Matching stair nose, reducer, T-molding & threshold — color-matched Blue Forest transitions and stair parts.
• Underlayment & moisture barrier — a vapor barrier is recommended over concrete subfloors.

Refreshing a kitchen or bath? Pair it with our in-house Rose Hill Cabinets to complete the room.

Blue Forest engineered bamboo bonds a genuine strand-woven bamboo wear layer to a dimensionally stable engineered core, giving you wide, long planks that resist the seasonal movement of solid floors. Most colors install with a glueless click-lock system that floats over most subfloors on any grade level — a refined, hardwood-look floor that works over concrete, radiant heat, and below-grade spaces when installed to spec.

Features

• Real strand bamboo wear layer: the hardness and grain of natural bamboo over a stable engineered core.
• Wide & long planks: up to 7-1/2 in wide and 6 ft long for a bold, contemporary layout with fewer seams.
• Dimensionally stable: engineered construction handles concrete subfloors, radiant heat, and below-grade installs per guidelines.
• Easy click-lock install: most colors float with a glueless click-lock; select styles are tongue-and-groove — check your color’s spec.
• Sustainable & low-emission: FSC-certified bamboo source, FloorScore certified, CARB Phase II compliant; lifetime structural & finish warranty.

Specifications

Coverage & Ordering

Sold by the box — coverage varies by color (roughly 11–30 sq ft per box), so confirm the square footage shown for your selected color and order about 7–10% extra for cuts, waste, and future repairs.

Tip: order your full project — including overage — in one purchase, so every box comes from the same production lot.

You may also need

• Matching stair nose, reducer, T-molding & threshold — color-matched Blue Forest transitions and stair parts.
• Underlayment & moisture barrier — for floating installs and over concrete subfloors.
• Bam-Brite hardwood cleaner — pH-balanced care to protect the finish.

Refreshing a kitchen or bath? Pair it with our in-house Rose Hill Cabinets to complete the room.

Blue Forest rigid-core click-lock bamboo pairs a real strand-woven bamboo surface with a dense, 100% waterproof SPC (stone-plastic composite) core — so you get the warmth and hardness of natural bamboo with the worry-free performance of a waterproof floor. A pre-attached acoustic pad quiets every step, and the glueless click-lock system floats over most existing subfloors on any grade level, making it a fast, forgiving install for kitchens, baths, basements, and busy living spaces.

Features

• 100% waterproof: the rigid SPC core will not swell — install confidently in kitchens, baths, laundries, and basements.
• Real strand bamboo surface: genuine bamboo hardness and grain over an engineered waterproof core.
• Attached acoustic pad: a 1 mm pre-attached underlayment softens footsteps and quiets the room — no separate underlayment to buy.
• Glueless click-lock: floats over most existing hard-surface floors with no glue or nails, on all grade levels.
• Sustainable & low-emission: FSC-certified bamboo source, FloorScore certified, CARB Phase II compliant; lifetime structural & finish warranty.

Specifications

Coverage & Ordering

Sold by the box — each box covers 15.45 sq ft. Order about 7–10% extra for cuts, waste, and future repairs. No acclimation is required for the rigid core, but let boxes sit flat in the room for 24–48 hours before installing.

Tip: order your full project — including overage — in one purchase, so every box comes from the same production lot.

You may also need

• Matching stair nose, reducer, T-molding & threshold — color-matched Blue Forest transitions and stair parts.
• Vapor barrier — recommended over concrete subfloors.
• Bam-Brite hard-surface cleaner — safe, streak-free care for waterproof floors.

Refreshing a kitchen or bath? Pair it with our in-house Rose Hill Cabinets to complete the room.

Blue Forest strand-woven solid bamboo is one of the hardest, most sustainable natural floors you can install — real bamboo fibers compressed under enormous pressure into a dense, dimensionally stable plank that rates well above red oak on the Janka hardness scale. Wide 6-foot tongue-and-groove planks install by nail-down or glue-down over wood or concrete subfloors, on or above grade, for a warm, seamless hardwood look that stands up to kitchens, kids, and pets.

Features

• Extremely hard & durable: strand-woven construction far exceeds traditional hardwoods on the Janka scale — built for high-traffic homes.
• Solid, refinishable bamboo: a genuine solid floor backed by a lifetime structural & finish warranty.
• Sustainably sourced: bamboo from FSC-certified forests; FloorScore certified and CARB Phase II compliant.
• Wide 6 ft planks: long 1850 mm boards with a 5-5/8 in face for fewer seams and a clean, modern layout.
• Installs anywhere wood works: nail-down or glue-down, below, on, or above grade with proper acclimation.

Specifications

Coverage & Ordering

Sold by the box — each box covers 16.97 sq ft. Order about 7–10% extra for cuts, waste, and future repairs. Bamboo should acclimate in the room at least 3–4 days before installation; keep interior humidity between 35–55%.

Tip: order your full project — including overage — in one purchase. Flooring is produced in batches, and re-orders may ship from a different lot with slight shade variation.

You may also need

• Matching stair nose, reducer, T-molding & threshold — color-matched Blue Forest transitions and stair parts to finish edges, doorways, and steps.
• Underlayment & moisture barrier — a vapor barrier is recommended over concrete subfloors.
• Bam-Brite hardwood cleaner — pH-balanced care to keep the finish looking new.

Refreshing a kitchen or bath? Pair it with our in-house Rose Hill Cabinets to complete the room.

The finishing pieces that make a Daltile luxury-vinyl floor look built-in instead of dropped-in. Stair noses, treads, transition strips and edge trim — coordinated with your Daltile LVF planks so every step, doorway and floor edge blends into the floor you chose.

Pick the profile you need below. Every piece is milled to match Daltile's SuperGuard™ luxury-vinyl collections — tell us your plank color at checkout, or ask MJ, and we'll match it.

Which profile do I need?

• 4-in-1 Transition Strip. The workhorse. One track adapts to a reducer, T-mold, end cap or square nose to bridge your floor to carpet, tile, or a different height.
• Overlap Stair Nose. Wraps and protects the front edge of a step — the standard way to finish stairs.
• Extended Stair Nose. A deeper overlap for thicker floor build-ups.
• Stair Cap. Caps the leading edge of a tread for a clean, low-profile step.
• Round Stair Tread. A full walk-on tread with a rounded front for a finished stair.
• End Cap. Finishes the floor cleanly where it meets a door track, sliding door, or threshold.
• Quarter Round. Covers the expansion gap where the floor meets the wall or baseboard.

Specifications

Sizing

Straight moldings (transition strip, quarter round, stair nose, end cap) run about 94" long; stair caps and treads are sized per step. Not sure how many pieces you need? Send MJ your stair count and doorways below and he'll work it out.

Bring timeless pattern and genuine warmth underfoot with W by MSI McCarran Herringbone, a genuine oak engineered hardwood built for a designer look. Each 5 in. × 24 in. plank is finished with a full 4 mm layer of real Oak and sized for a classic herringbone install, so your floor reads as a bespoke parquet while keeping the everyday stability of engineered construction. It is a standout choice for entryways, kitchens, and living areas where you want floors that set the tone for the whole room.

Features

• Real oak veneer: A genuine 4 mm wear layer of natural Oak gives every plank authentic grain and warmth — and the ability to be refinished over its lifetime.
• Classic herringbone pattern: Compact 5 in. × 24 in. planks lay into a timeless herringbone geometry for rich, directional movement and instant designer appeal.
• CrystaLux™ Ultra finish: An advanced protective topcoat resists everyday scuffs, scratches, and wear from foot traffic.
• Micro-beveled edges: Crisp, defined edges frame every plank and sharpen the herringbone pattern.
• Engineered stability: A dimensionally stable engineered core resists the seasonal expansion and contraction of solid wood, keeping floors flat and true.
• Versatile installation: Engineered construction suitable for floating or glue-down installation over approved subfloors.

Specifications

Coverage & Ordering

Each box covers 15.5 sq ft and contains 20 planks. To find how many boxes you need, divide your total square footage by 15.5 and round up. We recommend ordering about 10% extra for cuts, waste, and the additional offcuts a herringbone layout requires.

Tip: Wood varies naturally board to board and lot to lot — order your full project at once, including overage, so every plank ships from the same production run and your shade stays consistent.

You may also need

• Compatible underlayment (for floating installations)
• Transition strips / T-molding for doorways and floor transitions
• Stair nose for step edges and landings
• Flooring adhesive (for glue-down installations)

Documents

Ships as boxed cartons via freight; most orders arrive in 3–7 business days. Inspect your delivery on arrival and report any transit damage within 48 hours.

Bring home the warmth of genuine oak with W by MSI McCarran, a wide-plank engineered hardwood floor. Each 9.5 in. x 86 in. plank layers a generous 4 mm wear layer of real Oak veneer over a dimensionally stable engineered core — the authentic grain, tone, and texture of solid wood with the added stability of engineered construction. The long, wide format brings a refined, open feeling to entryways, kitchens, and living areas.

Features

• Real oak veneer: A genuine 4 mm layer of natural Oak — real wood underfoot with authentic grain that can be sanded and refinished.
• CrystaLux™ Ultra finish: A durable protective surface engineered to resist everyday scuffs, scratches, and foot traffic.
• Micro-beveled edge: Softly defined edges frame each board and add subtle dimension across the floor.
• Wide & long plank drama: Oversized 9.5 in. x 86 in. boards mean fewer seams and a more expansive, seamless look.
• Engineered stability: A multi-ply core resists seasonal movement and is suitable for floating or glue-down installation.

Specifications

Coverage & Ordering

Each box covers 34.10 sq ft and contains 6 planks. We recommend ordering about 10% extra for cuts and waste.

Tip: Wood varies naturally board to board and lot to lot — order your full project, including overage, in one purchase so every plank ships from the same production run.

You may also need

• Underlayment (for floating installations)
• Transition strips / T-molding
• Stair nose
• Flooring adhesive (for glue-down installations)

Documents

Ships as boxed cartons via freight; most orders arrive in 3–7 business days. Inspect your delivery on arrival and report any transit damage within 48 hours.