Hardware Resources

Stacked wine glasses chip, and standing them upright wastes shelf space. This solid maple rack hangs them by the stem under a shelf or cabinet, bowls down, where they stay put and out of the way. It's the natural mate to the Maple Bottle Rack if you're building a little wine bar.

Pick the width to fill the run you've got. The 18" tucks under a single shelf, and the 30" and 36" carry a full set of glasses.

Features

• Solid maple. Real wood rails that hold glasses steady instead of letting them swing.
• Finish to match. Ships pre-sanded and raw, so you stain or paint it to blend with the cabinet above.
• Trimmable. Cut the rails down to fit a narrower opening cleanly.
• Mounts under a shelf or cabinet. Hangs glasses by the stem and frees up the shelf below.

Sizing

This rack is built for 12"-deep cabinets, so check your depth first. Then measure the width of the opening or shelf underside and match the rack to it — 18", 30", or 36". The maple is trimmable, so you can shorten a rack to land it between face-frame returns and keep the rows even.

Specifications

What's in the Box

• One solid maple stemware rack in the selected width
• Mounting hardware and instructions

Loose bottles roll around a cabinet and knock into each other. This solid maple rack lays them on their sides in neat rows so the corks stay wet and nothing shifts when you close the door. It mounts to the cabinet base, and racks can stack on top of each other when you want more rows.

Pick the width to fit the opening. The 24" holds a starter run, the 30" carries six bottles, and the 48" turns a wider base into a real wine cabinet.

Features

• Solid maple. Real wood that holds screws and stacks square, not a wire basket.
• Finish it your way. Ships pre-sanded and raw, so you stain or paint it to match your cabinetry.
• Trimmable. Cut it down to slip into a tight opening without losing the look.
• Mounts or stacks. Fasten to the cabinet base, or stack racks for more rows.

Sizing

Measure the cabinet opening and match it to the rack width. The 24" and 30" drop into a standard base cabinet; the 30" holds six bottles. The 48" wants a wider base. Because the maple is trimmable, you can shave a rack a little to clear face-frame returns and still keep it looking factory.

Specifications

What's in the Box

• One solid maple bottle rack in the selected width
• Mounting hardware and instructions

Not every kitchen has wall space for a towel bar, and this one doesn't need any. The stainless bar hooks over the top edge of a cabinet door and hangs your towel on the inside or the front — no screws, no holes.

It's the fast fix for a dish towel that's always ending up on the counter. Lift it off when you want it gone, hook it back on when you don't.

Features

• No drilling. Hooks over the door edge — nothing to screw into the cabinet.
• Stainless bar. Won't rust from a damp towel day after day.
• Moves with you. Lift it off and hang it on a different door anytime.
• Keeps the towel handy. Right at the sink cabinet where you use it.

Specifications

What's in the Box

• One over-the-door towel bar
• Instructions

The floor of the sink cabinet takes the worst of it — slow drips, a leaky trap, the bottle of dish soap that never quite seals. This silicone mat lines that floor and catches all of it, so water pools in the mat instead of soaking into the cabinet bottom.

Raised edges hold the spill in. When something lets go under there, you pull the mat out, rinse it in the sink, and drop it back — no swollen particleboard, no smell.

Features

• Waterproof silicone. Drips and spills sit on top instead of soaking the cabinet floor.
• Raised lip. Contains the water so it can't run off the edge.
• Trim to fit. Cut it down with scissors to work around your plumbing and cabinet sides.
• Wipes or rinses clean. Pull it, rinse it, put it back.

Sizing

Sized for a 36" sink cabinet and trimmable down for anything smaller. Measure the inside floor of your cabinet, then cut the mat to clear the drain pipe and hug the walls. Trimming a little short is better than forcing it up the sides.

Specifications

What's in the Box

• One under-sink silicone mat
• Instructions

A stand mixer is heavy, and hauling it up onto the counter every time you bake is how backs get tweaked. This spring-assisted lift does the lifting for you — the mechanism swings the mixer up and out of the base cabinet to counter height, then folds back down out of sight when you're done.

The soft-close action brings it up and sets it down gently instead of dropping the weight. Pick the shelf that matches your cabinet opening, or go without a shelf if you're mounting your own platform.

Features

• Spring-assisted lift. The mechanism carries the mixer's weight up and out for you.
• Soft-close. Raises and lowers gently — no slamming a 20-pound mixer around.
• Folds away. Drops back into the base cabinet so the counter stays clear.
• Built for stand mixers. Sized to lift a heavy countertop appliance from a base cabinet.

Sizing

Measure your cabinet opening width, not the door. Match the shelf to that opening — 12", 15", or 18". Choose No shelf if you're supplying your own platform for the mixer. The shelf is where the appliance rides, so getting the width right is what makes it clear the cabinet cleanly.

Specifications

What's in the Box

• One soft-close appliance lift mechanism in the selected configuration
• Shelf (on shelf configurations), mounting hardware and instructions

This rack screws up under a wall cabinet and cradles your wine bottles on their sides, right where you'd otherwise have dead space. Bottles stay stored the way they should be — horizontal, so the cork stays wet.

It's a clean way to free up shelf room and keep a few favorites within reach. Comes in Satin Nickel or Brushed Oil Rubbed Bronze, so it can match the rest of your hardware.

Features

• Stores bottles on their side. Keeps the cork wet and the wine where it belongs.
• Mounts to the cabinet bottom. Uses space you weren't doing anything with.
• Two finishes. Satin Nickel or Brushed Oil Rubbed Bronze to blend with your pulls and faucet.
• Simple, sturdy build. A few screws and it's up for good.

Sizing

One size, two finishes. Pick the finish that matches your existing hardware — Satin Nickel reads soft and warm-silver, Brushed Oil Rubbed Bronze reads dark. Leave clear space below the cabinet so a full bottle slides in and out without knocking the counter.

Specifications

What's in the Box

• One under-cabinet wine bottle rack in the selected finish
• Mounting screws and instructions

Wine glasses don't stack and they don't like sitting rim-down in a cabinet. This rack hangs them by the foot under an upper cabinet, so they're stored upside down, out of the dust, and easy to grab by the stem.

It screws to the underside of a cabinet and its channels hold stemware secure. A small piece that clears shelf space and keeps your good glasses from getting chipped.

Features

• Stem-slot channels. Glasses slide in by the foot and hang stable, rims protected.
• Under-cabinet mount. Uses dead space beneath a cabinet, freeing the shelf inside.
• Three finishes. Polished Chrome, Satin Nickel, or Brushed Oil Rubbed Bronze to match your hardware.
• Ships assembled. Screw it to the cabinet bottom and load your glasses.

Sizing

Pick the finish to match your kitchen's hardware — Polished Chrome, Satin Nickel, or Brushed Oil Rubbed Bronze. On fit, the thing to check is clearance below: measure from the cabinet bottom to the counter and make sure a hanging glass clears anything underneath, including a backsplash ledge or small appliances. Mount it into the solid cabinet frame, not just the thin bottom panel, so it holds a full row of glasses.

Specifications

What's in the Box

• One under-cabinet stemware rack in the selected finish, assembled
• Mounting screws and instructions

The top shelf of an upper cabinet is a graveyard for spices you can't read without a step stool. This pulldown brings them to you. Grab the handle and the three-tier rack swings down and forward out of the cabinet, right to counter height, then folds back up when you're done.

Three tiers hold a good-sized spice collection with the labels facing out. No more knocking bottles over reaching blind into the back of the shelf.

Features

• Pulldown motion. The rack lowers out of the upper cabinet to counter height, then swings back up.
• Three angled tiers. Bottles sit tipped so you read the labels without lifting them out.
• Frees the top shelf. Puts hard-to-reach upper storage back in daily use.
• Ships assembled. Mounts inside the cabinet ready to run.

Sizing

This mounts inside an upper cabinet, so measure the interior width, depth, and height — the rack needs room to fold up flat when stowed and swing down clear of the shelf below the opening. Give it a dry-fit through its full travel before you drive screws. Works best in a standard-depth wall cabinet mounted at typical upper-cabinet height.

Specifications

What's in the Box

• One 3-tier spice rack pulldown, assembled
• Mounting hardware and instructions