Kitchen

Extra shelf clips in a finish that matches your cabinet hardware. Each pin drops into a standard 5 mm shelf-hole and supports an adjustable shelf.

Handy when you add a shelf to a cabinet or replace clips that walked off over the years.

Features

• Standard 5 mm pin. Fits the common shelf-hole pattern in most cabinets.
• Four finishes. Antique copper, brass plated, white and zinc to match the interior.
• Retail pack. A set of clips ready to install.

Sizing

Fits standard 5 mm shelf-support holes. Pick the finish to match your hardware. Sold per retail pack.

Specifications

What's in the Box

• One retail pack of shelf support clips in the selected finish

A simple magnetic catch keeps a cabinet or wardrobe door shut without a knob-latch. The magnet mounts to the frame, the strike plate to the door, and the two snap together when you close it.

Pick single or double magnet by how much hold you want, and the color to blend with the cabinet interior.

Features

• Two hold strengths. Single magnet for light doors, double for a firmer grip — both rated to 15 lb.
• Two colors. White/zinc or brown/bronze to disappear inside the cabinet.
• Simple install. Magnet to the frame, strike to the door — screws included.

Sizing

Choose single or double and the color that matches your cabinet interior. Sold each.

Specifications

What's in the Box

• One magnetic catch (magnet + strike plate) in the selected type and color
• Mounting screws

The workhorse slide for rebuilding or upgrading a drawer. Full ball-bearing travel pulls the drawer all the way out so nothing hides at the back, and it carries a real load — rated to 100 lb.

Choose the standard full-extension version, or step up to the EZ-Open soft-close that eases the drawer shut on its own. Both are side-mount and install as a matched left/right pair.

Features

• 100 lb rated. Heavy-duty ball-bearing slides built for loaded drawers.
• Full extension. The drawer comes all the way out — full reach to the back.
• Soft-close option. The EZ-Open version catches and closes the drawer quietly.
• Side mount, matched pair. Standard side-mount install; each pack is a left/right set.

Sizing

Measure your drawer depth and pick the matching slide length. Standard full-extension comes in 10" through 24"; the EZ-Open soft-close comes in 18", 20" and 22". Sold as a pair (one drawer). Not sure on length? Ask MJ below.

Specifications

What's in the Box

• One matched pair of HR Max drawer slides in the selected style and length
• Mounting screws and instructions

The quiet fix for a door that swings too far. This stop clips onto the existing hinge pin — no drilling, no screws — and catches the door before it hits the cabinet next to it or the wall behind it.

Pick the finish to match your hinges and pulls. The self-adjusting-pad version adds a soft bumper that sets its own stopping point; the standard version is the clean metal stop.

Features

• No drilling. Slips onto the hinge pin in seconds — nothing to bore or screw.
• Protects doors and walls. Stops the swing before anything makes contact.
• Five finishes. Dark brushed antique copper, polished brass, polished chrome, satin nickel and white to match your hardware.
• Two styles. With a self-adjusting bumper pad, or a clean standard metal stop.

Sizing

Fits standard cabinet hinge pins. Choose your style and finish above. Sold each — order one per door you want to protect.

Specifications

What's in the Box

• One hinge-pin door stop in the selected style and finish

Corner cabinets swallow whatever gets pushed to the back. The CornerMax turns that dead corner into rotating storage you can actually reach — two shelves spin out oversize pots, mixing bowls and small appliances with a spin.

What makes it different: there's no central pole. The frame mounts to the cabinet walls on support arms, so the shelves look like they're floating and nothing blocks the middle. Shelves are UV-finished birch plywood with a polished chrome rim that keeps things from sliding off.

Features

• No center pole. Wall-mounted frame means the whole shelf is usable — nothing to work around.
• Two full rotating shelves. Birch plywood with a polished chrome retaining rim.
• Fits round and angled corners. Round for square corner cabinets; kidney shapes for diagonal corner cabinets.
• Installs cleanly. Includes the frame, two shelves, mounting hardware, instructions and a drilling jig that makes setup quick.

Sizing

Match the shape to your corner cabinet and the size to the cabinet width. The 18" round suits a square corner base; the 28" kidney fits a 33" base corner cabinet and the 32" kidney fits a 36" base corner. Measure your cabinet opening before ordering — and if you're pairing this with Rose Hill corner cabinetry, ask MJ below and he'll confirm the fit.

Specifications

What's in the Box

• CornerMax frame and two rotating shelves in the selected shape/size
• Mounting hardware, installation instructions, and a drilling jig

Keep the countertop clear and charge phones, tablets and watches out of sight. This drawer replaces an existing cabinet or vanity drawer and hides two AC outlets and two USB-C ports inside — plug in up to four devices and shut the drawer, everything keeps charging behind a clean drawer front.

It ships fully assembled and plugs into an outlet inside the cabinet, so there's no electrician and no wiring — the patent-pending rear bracket lines it up and the drawer simply drops in.

Features

• Two AC outlets + two 30W USB-C ports. Two 12-amp tamper-resistant outlets and two fast USB-C ports charge up to four devices at once.
• Charges with the drawer closed. Everything stays powered behind the front, so cords and clutter disappear.
• Built-in safety. An interlocking thermostat cuts power if the drawer gets above 120°F, and the unit is ETL certified.
• Real drawer, quality slides. UV-coated white birch dovetail box on preinstalled HR Max™ full-extension, soft-close undermount slides.
• No electrician. Ships assembled; the rear bracket positions it and it plugs into an existing cabinet outlet.

Sizing

Pick the size to match your cabinet opening — a minimum 15" opening is required. Kitchen widths come in 15", 21" and 27"; the shallower 15" bath option is sized for a vanity base. It's designed to fit NorthPoint Cabinetry vanity base VB18, 3-drawer vanity base VDB18-3, or any cabinet meeting the minimum opening. Not sure which fits? Ask MJ below.

Specifications

What's in the Box

• One charging drawer in the selected size, fully assembled
• Preinstalled HR Max soft-close undermount slides and patent-pending rear bracket
• Installation instructions

Build a charging spot right into your cabinetry or a countertop edge. This flush USB-A + USB-C station drops into a single 40 mm hole and runs on the same 24V Loox system as your lights, so phones and tablets charge from a clean, built-in port instead of a cord snaking across the counter.

A small, modern touch that makes a kitchen or a home office feel thoughtfully custom. Black or white to match your surface.

Features

• USB-A + USB-C. Charges older and newer devices from one built-in station.
• Flush mount. Drops into a 40 mm hole or screw-fixes with the included frame — sits clean and low-profile.
• Runs on 24V Loox. Powered by the same driver as your under-cabinet lights.
• 16 W output. Enough for phones and tablets.
• Black or white. Match it to your counter or cabinet.

Sizing

Requires a 40 mm (1 9/16") hole, or screw-fix with the included 46.5 mm frame. 24V, 16W. Runs off a Loox power supply kit (see below). Ask MJ if you want help planning the location and power.

Specifications

What's in the Box

• One Loox USB-A/USB-C charging station in the selected color, with mounting frame (power supply sold separately)

A tiny recessed puck light that drops into the underside of a cabinet, a toe-kick, or a display shelf and throws a clean, focused pool of light — perfect for task lighting over a counter or a soft glow in a glass-front cabinet. Just a 2" cutout and it sits flush.

High-CRI 90 light (colors look true), four finishes to match your hardware, and warm or cool white. Runs on the same 24V Loox system as the strips — power it with the Loox driver.

Features

• Flush recessed puck. Small 2" cutout, sits clean in the cabinet underside or shelf.
• CRI 90 light. High color accuracy — food, wood and finishes look true.
• Four finishes. Chrome, black, white or nickel to match your hardware trim.
• Warm or cool white. 3000K glow or 4000K crisp task light.
• 24V Loox system. Pairs with the Loox strips and power supply kit.

Sizing

24V, 2.5W recessed puck with a 2 m modular lead. Choose your finish and color temperature. Each light is sold individually; you'll want a 24V Loox power supply kit to run them — ask MJ below and he'll size the driver for how many pucks you're planning.

Specifications

What's in the Box

• One recessed LED puck light in the selected finish and color temperature, with 2 m modular lead (power supply sold separately)