Hardware Resources

Stacked pots are a fight — you lift three to get the one on the bottom, and the lids come clattering after. This pullout brings the whole set out to you so your pots and pans sit out in the open instead of buried at the back.

It's a full extension on slides, chrome wire, sized for a standard 15" base cabinet. Load your everyday pans up top and the roasting pan below.

Features

• Full extension. The rack rolls all the way out so the back of the cabinet comes to you.
• Holds pots and pans. Deep enough for stockpots, open enough to grab without unstacking.
• Chrome wire build. Wipes clean and won't hold onto cooking grease.
• Ships assembled. Out of the box and onto the slides.

Sizing

Measure your cabinet opening, not the door. This is built for a 15" base cabinet (B15) — confirm your opening clears the frame before ordering.

Specifications

What's in the Box

• One cookware pot pullout
• Slides, mounting hardware and instructions

Lids are the mess in every base cabinet. They slide off the stack, wedge behind the pots, and never match the pan you're holding. This pullout stands them up on edge so you can see every one and grab the right one.

It rolls out on the slides so you're reaching in from above, not digging blind. Chrome wire, wipes clean, and it fits a standard 15" base cabinet.

Features

• Lids stand upright. Each one sits on edge and stays put, so you read the whole set at a glance.
• Full pullout. The rack rolls all the way out on its slides for reaching in from the top.
• Chrome wire build. Nothing to trap grease; wipe it down and it's done.
• Ships assembled. Mount it and load it the same afternoon.

Sizing

Measure your cabinet opening, not the door. This unit is built for a 15" base cabinet (B15) — check that your opening clears the frame before you order.

Specifications

What's in the Box

• One cookware lid organizer pullout
• Slides, mounting hardware and instructions

A basket that rolls out on slides beats reaching blind into the back of a base cabinet. Pull it toward you and everything comes with it, so the stuff you buried last month is suddenly right in front of you.

The open wire basket is bright polished chrome that wipes clean and lets crumbs fall through. Match the size to your cabinet opening: 12", 15" or 18", and the basket rides out on its slides every time you open the door.

Features

• Full pullout. Rides out on slides so the back of the cabinet comes to you.
• Open wire basket. See everything at a glance and let crumbs fall through instead of pooling.
• Polished chrome. Bright finish wipes clean and resists rust in a busy kitchen.
• Ships assembled. Mount the slides, drop it in, and it's working.

Sizing

Measure your cabinet opening, not the door, and pick the basket sized under it: the 12" opening takes an 11-3/8" basket, the 15" opening a 14-3/8", and the 18" opening a 17-3/8". Those base sizes line up with a B15, B18 and B21 cabinet. The basket runs a little narrower than the opening so the slides have room to travel.

Specifications

What's in the Box

• One polished chrome pullout basket in the selected size
• Slides, mounting hardware and instructions

Sometimes you just need one clean divider to stand a few trays or lids on edge. This polished chrome U-shape mounts inside a cabinet and gives you an instant vertical slot without a whole wooden rack.

The U profile is simple and strong, and the bright chrome wipes clean and matches wire pullouts and other kitchen hardware. Good for a single dividing wall between baking sheets, lids or cutting boards.

Features

• U-shaped bracket. A single sturdy divider to stand trays or lids upright in the cabinet.
• Polished chrome. Bright finish wipes clean and matches other kitchen hardware.
• Compact and simple. Adds a vertical slot without filling the cabinet with a full rack.
• Ships assembled. Mount it and go.

Sizing

Measure your cabinet opening and decide where you want the divider to fall before you set it. This is a single U-shaped bracket, so it creates one dividing wall, plan the spacing around the trays or lids you mean to stand there. Confirm the cabinet is tall enough for your items to sit upright.

Specifications

What's in the Box

• One polished chrome U-shaped tray divider
• Mounting hardware and instructions

A deep drawer full of plates or spice jars sliding loose is a chipped-dish waiting to happen. This peg board lines the drawer bottom and the pegs drop into the holes wherever you want them, boxing each item in so nothing shifts when the drawer moves.

Pick the width to match your drawer: 24" with 9 pegs for a standard base, 30" with 12 pegs for a wider run, or 39" with 16 pegs for a big lower drawer. More pegs means more dividers to hold plates upright or corral spice jars and dishes.

Features

• Movable pegs. Reposition them in the holes to fit plates, bowls or spice jars, any layout you need.
• Holds dishes upright. Peg them in place so plates stand on edge and don't slide or chip.
• Solid wood board. A flat base that sits in the drawer and takes the weight of stacked dishware.
• Ships assembled. Lay it in, set your pegs, load your dishes.

Sizing

Measure the inside width and depth of your drawer box, then choose the board that fits without binding. The 24" (9 pegs) suits a standard base drawer, the 30" (12 pegs) a wider one, and the 39" (16 pegs) a large lower drawer such as those under a cooktop. Leave a little clearance so the board seats flat on the drawer bottom.

Specifications

What's in the Box

• One peg board drawer insert in the selected size
• Set of movable pegs (9, 12 or 16 to match the board)

Baking sheets, cutting boards and pot lids stack into a mess that always falls over when you pull one out. This divider stands them on edge instead, each in its own slot, so you grab one without toppling the rest.

It fits a tall base or a narrow cabinet you never quite knew what to do with. Store trays and boards upright and you turn dead vertical space into the handiest storage in the kitchen.

Features

• Vertical slots. Trays, lids and boards stand on edge so any one pulls free on its own.
• Uses tall space. Turns an awkward narrow cabinet into real, usable storage.
• Solid wood build. Sturdy dividers hold their spacing under the weight of loaded pans.
• Ships assembled. Set it in the cabinet and load it up.

Sizing

Measure your cabinet opening, not the door, before ordering. The divider is 12" deep front to back and needs a cabinet tall enough to stand your largest tray or cutting board upright. Check both the interior height and the depth so nothing sticks past the door.

Specifications

What's in the Box

• One wooden tray divider
• Ready to use, no hardware required

Utensils lying flat in a drawer are a pain to sort through. This insert tilts everything forward so the handles rise toward you and you can see what you're grabbing before you dig.

It's built for the deep drawer next to the stove, where spatulas, ladles and whisks pile up. The angled bays keep tall tools upright and stop the whole lot from sliding into a heap.

Features

• Forward tilt. Utensils angle up so handles face you and nothing hides at the back.
• Divided bays. Keeps spatulas, spoons and whisks sorted instead of tangled.
• Solid wood build. Weighted to stay in place as the drawer travels.
• Ships assembled. Drop it in and start loading.

Sizing

Sized for a 24" (B24) base cabinet drawer. Measure the inside width and depth of your drawer box before ordering, and check that the drawer is deep enough for the tilt, angled inserts need a bit more clearance than a flat tray. The tallest handles should still clear the drawer front when it shuts.

Specifications

What's in the Box

• One 19" angled utensil drawer insert
• Ready to use, no hardware required

Good knives don't belong loose in a drawer, sliding around and dulling on each other every time you open it. This block sits down in the drawer and holds each blade in its own angled slot, edge protected, handle up where you can grab it.

It's the safer answer to a countertop knife block that eats prime workspace. Drop it in a base cabinet drawer near your prep area and your knives are out of sight but right where you reach for them.

Features

• Angled slots. Each knife lies at a slight tilt so blades never touch and handles stay easy to grip.
• Clears the counter. Moves the whole block into the drawer and frees up your work surface.
• Solid wood build. Heavy enough to stay put when the drawer opens and shuts.
• Ships assembled. Set it in the drawer and you're done.

Sizing

This one is sized for a standard base cabinet drawer, roughly a 21" (B21) base. Measure the inside of your drawer box, both width and depth, and make sure the 16" block clears the drawer front when it closes. If your knives are extra long, check that the slots run deep enough before you set it.

Specifications

What's in the Box

• One 16" knife block drawer insert
• Ready to use, no hardware required