Tile Accessories

The specialty profiles that solve the tricky edges — where tile meets a lower floor, runs into carpet, turns an outside corner, or just needs a budget-friendly finish. Pair these with the aluminum edge trim to cover every transition on the job.

Which profile do I need?

• Reducer. Ramps tile down to a thinner adjacent floor for a smooth, trip-free transition.
• Carpet Edge. Caps the tile edge and grips the carpet where the two floors meet.
• Quarter-Round Edge. A softly rounded outside edge for tile corners and steps.
• PVC Edge Protector. The economical white edge finish for walls and backsplashes.

Specifications

Waterproof the assembly before the tile goes on. This peel-and-stick membrane bonds to shower walls, floors, benches, and curbs to create a continuous waterproof layer — then you tile directly over it. For floors over concrete or wood, the poly moisture barrier and vinyl adhesive keep dampness from ever reaching the finish.

Get the coverage you need: the 225 sf roll for full showers and wet rooms, or the 25 sf kit (primer & razor included) for small jobs and repairs.

Features

• Peel & stick. No hot mopping, no liquid cure time — roll it on and tile.
• Continuous waterproofing. Seals walls, floors, seams, and transitions in showers and wet areas.
• Primer & adhesive. Water-based primer for the membrane; vinyl PSA and 6-mil poly barrier for floor moisture control.
• Two sizes. Full 225 sf roll or a 25 sf starter kit.

Specifications

Finish your Aria installation with a jewel-bright edge. This 3x18 polished porcelain bullnose is the matching trim for MSI Aria Polished Porcelain Tile, giving backsplash terminations, shower niches, curbs, and countertop edges a smooth, rounded, factory-finished profile. It comes in Bianco, Ice, and Oro to coordinate seamlessly with the Aria field tile.

Features

• Matching finished edge: color-matched to Aria Bianco, Ice, and Oro field tile for a seamless transition.
• Rounded bullnose profile: a smooth, glazed edge that conceals raw tile edges on walls, curbs, and niches.
• Polished porcelain: a mirror-bright, low-maintenance surface that resists moisture and everyday wear.
• Versatile trim: ideal for backsplash edges, shower niches, window returns, and residential countertop edges.
• Coordinated collection: pairs with the full Aria field tile and mosaic range for a complete design.

Specifications

Coverage & Ordering

This bullnose is measured by the piece. Each 3x18 piece finishes 18 inches (1.5 linear feet) of tile edge, and every box contains 25 pieces — 37.5 linear feet of finished edge.

Measure the total length of edge you need to finish and add about 10% extra for cuts and waste.

Tip: order your full project — including overage — in one purchase. Tile is produced in batches, and re-orders may ship from a different lot with slight shade variation.

You may also need

This trim is the matching finished edge for MSI Aria Polished Porcelain Tile. To complete a professional installation you will also want thinset mortar, grout matched to your field tile, tile spacers, and where the trim meets another surface a coordinating metal edge / transition trim (e.g., Schluter). As a polished porcelain product, this trim does not require sealing. Pair it with our in-house Rose Hill Cabinets to complete the room.

Documents

Ships as boxed cartons via freight; most orders arrive in 3–7 business days. Inspect your delivery on arrival and report any transit damage within 48 hours.

Give your Brighton installation a clean, finished edge with matching 3x24 bullnose trim. Cut from the same marble-look porcelain as the Brighton Marble-Look Porcelain Tile, each piece carries a single rounded (bullnose) edge that conceals raw tile edges at wall ends, niches, shower curbs, and countertop returns. It is offered in Gold (matte or polished) and Grey (matte) to coordinate with the Brighton field tile and mosaics.

Features

• One finished edge: a smooth, rounded bullnose profile for clean transitions where tile meets an open edge.
• Matched to the collection: the same marble-look porcelain and veining as the Brighton field tile and 2x2 hexagon mosaics.
• Color & finish choices: Gold in matte or polished, and Grey in matte.
• V3 shade variation: natural, varied marble movement from piece to piece.
• Built for walls and wet areas: ideal for backsplashes, niches, and countertop edges in residential and light commercial spaces.

Specifications

Coverage & Ordering

Each 3x24 piece finishes 2 linear feet of edge (10 pieces = 20 linear ft per box). Measure the total length of exposed edge you need to trim, then order about 10% extra for cuts and waste.

Tip: order your full project — including overage — in one purchase. Tile is produced in batches, and re-orders may ship from a different lot with slight shade variation.

You may also need

This bullnose is made to finish the edges of the Brighton Marble-Look Porcelain Tile. To complete the installation you will also want thinset mortar, grout, tile edging / metal trim (such as Schluter) for inside and outside corners, and tile spacers. Being porcelain, this trim is impervious and does not require sealing.

Pair it with our in-house Rose Hill Cabinets to complete the room.

Ships as boxed cartons via freight; most orders arrive in 3–7 business days. Inspect your delivery on arrival and report any transit damage within 48 hours.

Finish the job the way the pros do. These natural White Carrara marble accessories — double-bevel thresholds, a Hollywood-bevel shower seat, a long side splash, pencil moldings, and a polished corner shelf — put clean, purposeful edges on showers, doorways, and vanities. They coordinate with our Carrara White marble tile and Arabescato Carrara marble tile for a seamless head-to-toe install.

Features

• Genuine Carrara marble: quarried natural stone with soft white grounds and delicate gray veining, so every trim piece matches your field tile.
• Thresholds & transitions: polished double-bevel thresholds, a Hollywood-bevel shower seat, and a single-bevel side splash finish curbs, doorways, and vanities.
• Pencil moldings: Carrara White (polished or honed) and Arabescato Carrara 3/4 x 12 liners frame niches, mosaics, and borders.
• Corner shelf: a 9 in. radius Turkish Carrara shelf tucks neatly into shower corners for real, built-in storage.
• Seal it: natural marble is porous — seal at installation and periodically thereafter, and clean with a pH-neutral stone cleaner to protect the finish.

Specifications

Coverage & Ordering

We recommend ordering about 10% extra for cuts and waste.

Tip: order your full project — including overage — in one purchase. Marble is a natural stone produced in batches, and re-orders may ship from a different lot with slight shade and veining variation.

You may also need

Round out your install with the sundries the pros keep on hand:

• Thinset / mortar — a white polymer-modified thinset is recommended for light-colored marble.
• Grout — unsanded grout for the tight joints on pencil moldings and mosaics.
• Stone sealer — natural marble is porous and must be sealed at installation and periodically thereafter.
• Tile edging / metal trim (e.g., Schluter) where a marble profile isn't used.
• Spacers for consistent joints.

Pair it with our in-house Rose Hill Cabinets to complete the room.

Documents

Ships as boxed cartons via freight; most orders arrive in 3–7 business days. Inspect your delivery on arrival and report any transit damage within 48 hours.

Every edge deserves a finished look. These glazed porcelain bullnose pieces put a smooth, rounded profile on exposed tile edges, stair noses, and wainscot caps — color-matched to our Pietra Carrara, Praia Carrara, and Kaya Carrara Bianco porcelain tile so trims disappear into the field.

Features

• Color-matched trim: profiled to blend with MSI's Pietra, Praia, and Kaya Carrara-look porcelain field tile.
• Clean finished edges: a smooth rounded bullnose caps wall ends, niches, wainscots, and stair noses.
• Matte & polished finishes: offered in 3x18 and 3x24 lengths to match your field tile.
• Durable glazed porcelain: dense, moisture-resistant, and easy to clean — no sealing required.
• Sold by the box: linear-foot coverage listed per option so you can order to your run length.

Specifications

Coverage & Ordering

Bullnose is sold by the box with linear-foot coverage per option. We recommend ordering about 10% extra for cuts and waste.

Tip: order your full project — including overage — in one purchase. Tile is produced in batches, and re-orders may ship from a different lot with slight shade variation.

You may also need

• Matching field tile: Pietra Carrara, Praia Carrara, and Kaya Carrara Bianco porcelain tile
• Thinset / mortar for setting
• Grout in a matching or contrasting shade
• Tile edging / metal trim (e.g., Schluter) where a bullnose return isn't used
• Tile spacers for consistent joints

Pair it with our in-house Rose Hill Cabinets to complete the room.

Documents

Ships as boxed cartons via freight; most orders arrive in 3–7 business days. Inspect your delivery on arrival and report any transit damage within 48 hours.

Finish every edge of your Eden installation with this 4x24 glazed porcelain bullnose, offered in Bardiglio, Calacatta, Dolomite, and Statuary in matte and polished finishes. The smooth rounded edge gives shower niches, countertop edges, wall terminations, and stair noses a clean, professional transition. It coordinates seamlessly with the Eden Marble-Look Porcelain Tile field tile.

Features

• Rounded bullnose edge — delivers a finished, professional transition on any exposed edge.
• Matches Eden field tile — glazed porcelain in Bardiglio, Calacatta, Dolomite, and Statuary.
• Matte and polished finishes — to pair with either Eden surface.
• Low shade variation — for a refined, consistent veined look.
• Versatile edge piece — ideal for wall terminations, shower niches, curbs, countertop edges, and stair noses.

Specifications

Coverage & Ordering

Sold by the box. We recommend ordering 10% extra to cover cuts.

You may also need

Pair this trim with the rest of your Eden order:

• Eden Marble-Look Porcelain Tile — the matching field tile this bullnose is made to finish.
• Eden Porcelain Mosaics — coordinating hexagon and chevron accents.
• Thin-set mortar — bonds the trim to the substrate.
• Unsanded grout — fills the joint between trim and field tile.
• Tile edge trim / metal profile (e.g., Schluter) — an alternative metal edge where a porcelain bullnose isn’t used.
• Tile spacers — keep joints even while pieces set.
• Penetrating sealer — recommended for polished, marble-look surfaces to guard against staining.

Documents

Ships by the box, freight calculated at checkout; most orders arrive in 5–10 business days. Inspect on delivery and note any damage on the carrier receipt — we'll make it right.

MSI Highland Park quarter round trim finishes your backsplash or shower wall with the same glazed ceramic and handcrafted character as the field tile. The slim, rounded 5/8 x 6 in. profile wraps outside corners, edges, and transitions cleanly, so exposed tile ends look built-in and intentional. It is offered in all seven coordinating Highland Park glazes to complete the MSI Highland Park Ceramic Subway Tile Collection.

Features

• Slim quarter-round profile — finishes exposed edges and outside corners for a clean, built-in look.
• Glazed ceramic — artisan, handcrafted character with subtle tonal movement.
• Coordinated glazes — matches Highland Park subway, beveled, and mosaic field tile.
• Made for walls — kitchen backsplashes, bathroom and shower surrounds, and accent walls.
• Greenguard Gold certified and USGBC/LEED contributing for low-emission, sustainable projects.

Specifications

Coverage & Ordering

Quarter round is sold by the box (20 pieces = 10 linear ft). We recommend ordering about 10% extra for cuts and waste.

Tip: order your full project — including overage — in one purchase. Tile is produced in batches, and re-orders may ship from a different lot with slight shade variation.

You may also need

Round out your order with the field tile and the setting materials the pros use:

• Highland Park Ceramic Subway Tile — the coordinating field tile this trim is made to finish.
• Thin-set mortar — bonds each piece to a properly prepared wall substrate.
• Unsanded grout — recommended for these narrow ceramic joints.
• Tile edge trim / metal profile (e.g., Schluter) — an alternative way to finish outside edges and corners.
• Tile spacers — keep courses straight and joints consistent.

Pair it with our in-house Rose Hill Cabinets to complete the room.

Documents

Ships as boxed cartons via freight, calculated at checkout; most orders arrive in 5–10 business days. Inspect your delivery on arrival and report any transit damage within 48 hours.