Tile Accessories

Finish your Continental Slate installation with coordinating trim. These liner, cove, and bullnose pieces cap exposed edges and add crisp definition to backsplashes, wainscots, and shower surrounds — in the same cleft-slate look and matte colors as the field tile.

Features

• Coordinating edge trim — finishes exposed tile edges and outside corners for a clean, built-in look.
• Three profiles — 1″×6″ liner, 3″×12″, and 6″×12″ pieces to suit borders, caps, and transitions.
• Eight matching colors — keyed to the Continental Slate field and mosaic for a seamless installation.
• Cleft-slate texture — the same high-definition surface as the collection's field tile.
• Made in the USA — produced domestically to Daltile's quality standards.

Specifications

Coverage & Ordering

Sold by the piece. 1″×6″ liner $18.75 each; 3″×12″ $8.71 each; 6″×12″ $18.75 each. Measure your finished edges and outside corners, and add about 10% extra for cuts.

You may also need

Complete the install with thinset mortar, grout in your chosen shade, and spacers. Continental Slate is porcelain and glazed ceramic, so no sealer is required.

Documents

Ships as boxed cartons via freight; most orders arrive in 3–7 business days. Inspect your delivery on arrival and report any transit damage within 48 hours.

Daltile Keracolor is a high-performance cement grout in a full range of designer colors — mold- and mildew-resistant, color-consistent, and easy to maintain. Pick your color and the right type for your joints.

Which type?

• Unsanded — for narrow joints up to 1/8″ (most wall tile, polished stone, glass).
• Sanded — for joints 1/8″ and wider (most floor and larger-format tile).

Specifications

Need a matching caulk or a sealer? Ask about our tile setting & care sundries.

The polished marble strip that finishes a doorway. A threshold (or saddle) bridges the gap where tile meets another floor, evens out a small height difference between rooms, and gives a clean, durable edge underfoot. Beveled on both long edges so nothing catches as you cross.

Choose your width and bevel to match the transition, and the marble color to complement your floor — classic Carrara White, dramatic Absolute Black, bright Thassos White, or warm Chiaro Beige.

Sizing & bevels

• Widths. 2" for standard door openings, 4" and 6" for wider passages and height changes.
• Double bevel. Both edges eased — the everyday choice between two finished floors.
• Hollywood bevel. A steeper, taller bevel for a larger height difference (single or double).
• All 36" long, polished. Cut to your opening on site.

Specifications

The metal edge that turns a raw tile edge into a finished one. This anodized-aluminum profile caps and protects the exposed edge of tile at an outside corner, a countertop lip, a backsplash return, or where tile meets another surface — the clean, modern alternative to bullnose (and Emser's answer to Schluter®-style trim).

The anchoring leg sets into your thinset under the tile; the rounded face sits flush against the tile edge. Pick the finish to match your fixtures and hardware.

Features

• Eleven finishes. From mill-natural and satin silver to matte black, brushed nickel, satin gold, bronzes, white and more — match your faucets, pulls, and lighting.
• Protects exposed edges. Shields tile corners and edges from chipping and gives a crisp, straight sightline.
• Anodized aluminum. Durable, corrosion-resistant, and colorfast — suitable for walls, floors, backsplashes, and countertops.
• Sized for standard tile. The 3/8" profile fits most common wall and floor tile. (5/16" and 1/2" heights available on request.)

Specifications

Sizing

Measure the linear footage of exposed edge you're finishing and divide by 8 for the number of pieces. Match the profile height to your tile thickness — 3/8" suits most tile. Not sure on height or finish? Ask MJ below.

The lightweight, waterproof substrate that replaces cement board. A rigid foam core between waterproof facing layers — it cuts with a utility knife, weighs a fraction of cement board, and needs no separate waterproofing on shower walls. Set it, tape and seal the seams, and tile.

Thinner boards make dead-flat walls and floor leveling; thicker boards build benches, curbs, and shims. Pick the size and thickness for the job.

Features

• Waterproof. Foam core with sealed facers — no additional membrane needed on walls.
• Lightweight & fast. Score-and-snap with a knife; a fraction of cement board's weight.
• Full thickness range. 1/8" leveling sheets up to 2" structural board for benches and curbs.
• Ready to tile. Bond directly with thin-set once seams are taped and sealed.

Specifications

Emser grout for tile, floors, and backsplashes — a durable, color-consistent cement grout offered in classic neutrals plus Emser's on-trend Designer Grout colors. Pick your color and the right type for your joints.

Which type?

• Unsanded — narrow joints up to 1/8″ (most wall tile, polished stone, glass).
• Sanded — joints 1/8″ and wider (most floor and larger-format tile).

Specifications

Designer Grout colors (Blossom, Botanical, Moon Rock, Sea Breeze, Deep Dive) add a subtle tint that plays off your tile. Ask about pairing a grout to your tile.

Flat floors start here. A tile leveling system pulls neighboring tiles to the same plane as the thinset cures, eliminating lippage — those slightly raised edges you catch with a bare foot or a mop. The clip sits under the joint, the reusable wedge presses down across both tiles, and once the mortar sets you snap the clips off at the floor line.

Essential for large-format tile, rectified edges, and anywhere a dead-flat finish matters. Build your kit below: pick your clip size to match your grout-joint spacing, add wedges, and grab the pliers for fast, consistent tension.

How it works

• Clips set into the thinset under the tile joint — one every few inches along the edge.
• Wedges push through the clip and press the tile faces flush; reuse them job after job.
• Pliers drive the wedge to firm, even pressure without over-tightening.
• Snap & go. After cure, break the clips off at the base — the wedges pop out to reuse.

Choosing your clip size

Clip size matches your grout-joint width: 1/32" and 1/16" for tight, rectified joints; 1/8" and 3/16" for standard joints. Wedges and pliers work across all sizes.

Specifications

The consumables that finish a waterproof install. Waterproof sealant seals seams, corners, and penetrations; the sausage gun and tips lay it down clean; mesh tape reinforces board seams; and screws, washers, and putty knives fasten and smooth. Stock the small stuff so the job doesn't stall.

What's here

• Waterproof sealant in 10 oz cartridge or 20 oz sausage.
• Sausage gun (with three tips) and replacement tips.
• Mesh tape for board seams.
• Screws & washers for fastening foam board — box or bucket.
• Putty knives, corner and flat, for smoothing sealant.

Specifications