Emser Tile Leveling System (E-Level Clips & Wedges)

Flat floors start here. A tile leveling system pulls neighboring tiles to the same plane as the thinset cures, eliminating lippage — those slightly raised edges you catch with a bare foot or a mop. The clip sits under the joint, the reusable wedge presses down across both tiles, and once the mortar sets you snap the clips off at the floor line.

Essential for large-format tile, rectified edges, and anywhere a dead-flat finish matters. Build your kit below: pick your clip size to match your grout-joint spacing, add wedges, and grab the pliers for fast, consistent tension.

How it works

• Clips set into the thinset under the tile joint — one every few inches along the edge.
• Wedges push through the clip and press the tile faces flush; reuse them job after job.
• Pliers drive the wedge to firm, even pressure without over-tightening.
• Snap & go. After cure, break the clips off at the base — the wedges pop out to reuse.

Choosing your clip size

Clip size matches your grout-joint width: 1/32" and 1/16" for tight, rectified joints; 1/8" and 3/16" for standard joints. Wedges and pliers work across all sizes.

Specifications

How many clips will my floor need?

Tell MJ your tile size and square footage and he'll estimate clip counts and the right size for your joints. 10+ years setting tile, replies by email within 1 business day.

Ask a Professional →